Free calculator

Mulch Calculator

Add your beds, up to five of them, set the depth, and choose mulch, topsoil or gravel. The mulch calculator gives you cubic feet, cubic yards and bags for the whole yard at once. Tons come from a typical weight per yard that you can replace with your supplier's.

How much do you need to order?

Add each bed, path or ring. Round shapes and triangles work too.

Loading the calculator…

Estimates only. Check quantities against the label of the product you buy. No sign-up, no ads; your numbers stay in this browser.

How it works

  1. Add the areas. Length and width in feet for each bed, path or tree ring. Up to five, and they add up.
  2. Set the depth. In inches. Beds usually get 2 to 3.
  3. Pick the material and package. Bags start at the size usual for that material (2 cubic feet for mulch), or type your own, or choose bulk for yards. Weight per yard is filled in from published figures, and you can replace it with your supplier's.
  4. Print or save the list. Each area and the total, in cubic feet, cubic yards, bags or tons. Print it or download a CSV.

Where the numbers come from

Depth and weight by material
MaterialTypical depthlb per cu ydWeight source
Mulch (bark or wood chips)2–4 in (Mississippi State University Extension)400University of Idaho Extension. Raw wood chips. Bagged and wet mulch weighs more: ask your supplier.
Compost2–3 in (Mississippi State University Extension)1,000Oregon State University Extension Service. Screened compost at 50% moisture; very wet compost weighs over 1,500.
Topsoilset your own2,025Los Angeles County Public Works, Environmental Programs. 2,025 lb dry, 2,106 lb wet.
Gravel or stoneset your own2,632.5Los Angeles County Public Works, Environmental Programs. Dry stone or gravel. Wet gravel weighs more.

Volume is area × depth ÷ 12 in cubic feet, ÷ 27 in cubic yards. Tons use short tons of 2,000 lb. Weight depends on moisture, stone and how the material was made, so replace the figure with your supplier's when you have it. Mississippi State gives 1 in for gravel used as mulch. Paths and driveways need more: set your own depth.

Bag sizes (1 cu ft, 1.5 cu ft, 2 cu ft, 3 cu ft for mulch) are common retail sizes. Type the size on your bag if it differs.

How it compares

Mulch calculators compared
Home and Garden America (this page)AlmanacCalculatorSoup*Bushe*
Bag sizeYou choose (2 cu ft for mulch to start), or your own2 cu ft; other sizes you work out by handNot confirmed2 cu ft
Several areas at onceUp to fiveNot statedNot confirmedNot confirmed
Gravel in tonsYes, from a typical weight you can overwrite with your supplier'sNot statedNot confirmedNot confirmed
Cost estimateNoNot statedYesNot confirmed
Sales pitchNone"View Product" blocks, newsletter signupNot confirmedNot confirmed
Print or CSVYesNot statedNot confirmedNot confirmed

Checked in November 2026. * From search result descriptions; we only opened the Almanac page in full. Gigacalculator and Inch Calculator also have mulch calculators that we didn't review.

On paper

Print the list with every bed on its own line and the total at the bottom. Handy when the landscape yard asks "how many yards?" and you'd rather not do the math at the counter. The CSV keeps it for next year's top-up.

How much mulch, topsoil or gravel to order

Measure each area

Beds are rarely one tidy rectangle. Break them into rectangles, measure each in feet and enter them as separate areas. For a round tree ring, switch that area to a circle and enter the distance across; a triangular corner takes its base and height. Dig out the ring around the trunk by hand if you want it subtracted.

The math

Area in square feet × depth in inches ÷ 12 gives cubic feet. Divide by 27 for cubic yards. A 200 square foot bed at 3 inches is 50 cubic feet, about 1.85 cubic yards. In 2 cubic foot bags that's 25 bags.

How deep, by use

For flower and shrub beds, 2 to 3 inches is the common target and the default most mulch calculators use. Less than that and weeds come through. Much more and the soil underneath can stay soggy and short on air.

Around trees, keep the same depth but pull the mulch back from the trunk. Bark piled against the trunk holds moisture there all year. You've seen the "mulch volcano" in parking lots. Don't copy it.

Paths get walked on and pack down, so they take more than beds. Topping up an old bed? Measure what's already there with a trowel and only add the difference.

Bags or bulk

A cubic yard is 27 cubic feet, or 13.5 bags of 2 cubic feet. Divide the bag price by 2 and the delivered price per yard by 27 to compare per cubic foot. Past a couple of yards, bulk often comes out ahead, but delivery fees vary so much that you should get a real quote. Bulk also arrives as one big pile on the driveway, so plan where it goes.

Gravel by the ton

Many quarries and landscape yards sell gravel by weight, not volume. Weight per cubic yard depends on the stone, its size and how wet it is, so any tons figure is an estimate. We start from about 2,633 pounds per cubic yard, a published figure for dry stone or gravel, so you see a number straight away. Then ask the supplier how many tons are in a yard of the stone you're buying and type that in: the supplier's figure is the one on your ticket.

This covers pea gravel for paths and decorative stone around beds. A gravel driveway is a different build, usually several layers of different stone. Ask your supplier what goes in each layer and how deep, then run the calculator once per layer.

Topsoil by the yard

Leveling a low spot or spreading a thin layer before seeding works the same way: area, depth, cubic yards. Pick topsoil as the material. For filling raised beds or pots, the Raised Bed Soil Calculator handles inside measurements and container sizes.

Questions people ask

How much mulch do I need for 100 square feet?

At 3 inches deep, 25 cubic feet, a little under a cubic yard, or about 13 bags of 2 cubic feet (12.5 rounded up). At 2 inches, about 17 cubic feet.

How many bags of mulch are in a yard?

13.5 bags of 2 cubic feet. With 3 cubic foot bags, 9.

How deep should mulch be?

2 to 3 inches in beds and around trees, kept back from trunks and stems. Paths take more because foot traffic packs them down.

Can I use this as a pea gravel calculator?

Yes. Pick gravel, enter your areas and depth, and you get cubic yards. For tons, add the weight per yard your supplier gives for that stone.

Does it work as a gravel calculator for a driveway?

For the volume, yes. A driveway is usually built in layers of different stone, so run each layer on its own with its depth and the supplier's weight for that stone.

Where does the weight per yard come from?

From published tables, listed under "Where the numbers come from". Weight per yard changes with the stone, the size and the moisture, so treat tons as an estimate and type your supplier's figure when you have it.

Can I measure my whole yard at once?

Yes. Enter up to five areas; the result shows each one and the total. That's the mulch calculator for a yard, not just a single bed.