How it works
- Enter the lawn area. Length and width in feet, or square feet if you already know it.
- Pick the grass and the job. Choose a grass type and switch between new lawn and overseeding. Each grass has its own rate in pounds per 1,000 square feet, with the source listed. If your seed bag gives a different rate, type it in. The bag wins.
- Add fertilizer, if you want. Enter the three numbers from the bag (like 29-0-4), how many square feet one bag covers, and how much nitrogen you want per 1,000 square feet.
- Print or save the list. Pounds of seed, bags of seed, bags of fertilizer. Print it or download a CSV.
Where the numbers come from
Seeding rates are pounds of seed per 1,000 square feet (1 lb per 1,000 sq ft is 0.49 kg per 100 m²). The rate printed on your seed bag overrides every number in this table. Blends and coated seed use their own rates.
| Grass | New lawn | Overseeding | Source |
|---|---|---|---|
| Kentucky bluegrass | 2–3 | 1.5 | Penn State Extension, University of Maryland Extension |
| Tall fescue (turf-type) | 6–8 | 4 | Penn State Extension, University of Maryland Extension |
| Perennial ryegrass (turf-type) | 4–5 | 2–5 | Penn State Extension |
| Fine fescue | 4–5 | 2.5 | Penn State Extension, University of Maryland Extension |
| Bermudagrass (hulled seed) | 1–1.5 | none published here | Kansas State University Research and Extension |
The calculator uses the middle of each range and shows the whole range next to the result. Bermudagrass: Unhulled seed: 1.5-2.0 lb. Hulled-coated: 1.5-2.0 lb. Unhulled-coated: 2.5-3.0 lb. Use the form printed on your bag.
Fertilizer: pounds of product = pounds of nitrogen ÷ the nitrogen share on the bag (the first of the three numbers). One pound of nitrogen per 1,000 sq ft is a typical single application of soluble nitrogen. Slow-release products and your bag label may differ.
- Turfgrass Seed and Seed Mixtures, Penn State Extension. New-lawn seeding rates per 1,000 sq ft; 2-5 lb for renovating with turf-type perennial ryegrass.
- Grass Seed (establishment and overseeding rates), University of Maryland Extension. Establishment and overseeding columns, lb per 1,000 sq ft. Page updated August 20, 2025.
- Bermudagrass in Kansas (MF1112, rev. August 2025), Kansas State University Research and Extension. Seeding rate by seed form (hulled, unhulled, coated); 1 lb nitrogen per 1,000 sq ft per application for bermudagrass.
- How to Calculate the Amount of Fertilizer Needed for Your Lawn (FS839), Rutgers Cooperative Extension. Nitrogen rates are given per 1,000 sq ft; a typical single application of soluble nitrogen is 1 lb N per 1,000 sq ft; pounds of product = pounds of N / N fraction.
How it compares
| Home and Garden America (this page) | Angi* | Inch Calculator* | Omni* | |
|---|---|---|---|---|
| Method | Area × rate for the grass you pick | Area ÷ 1,000 × a seeding rate | Area ÷ 1,000 × a seeding rate | Area ÷ 1,000 × a seeding rate |
| Grass type list with sources | Yes | Not confirmed | Not confirmed | Not confirmed |
| New lawn vs. overseeding | Separate rates | Not confirmed | Not confirmed | Not confirmed |
| Rate from your seed bag | Yes, overrides the table | Not confirmed | Not confirmed | Not confirmed |
| Fertilizer from N-P-K label | Yes | Not confirmed | Not confirmed | Not confirmed |
| Print or CSV | Yes | Not confirmed | Not confirmed | Not confirmed |
Checked in November 2026. * Based on search result descriptions; we didn't open these pages in full, so "not confirmed" means we couldn't check, not that the feature is missing. Lowe's also has a grass seed calculator, but the page wouldn't load for us.
On paper
Print the list before you go to the store: lawn size, grass type, pounds of seed, bags of seed and bags of fertilizer, with the rate you used. Keep the CSV, and next fall's overseeding takes thirty seconds.
How much grass seed you actually need
Measure the lawn
Measure in feet and multiply length by width. An odd-shaped yard breaks into rectangles: measure each, add them up, and type the total in square feet. Leave out beds, the patio and the driveway. Nobody seeds those on purpose, although the spreader sometimes disagrees.
Why rates are per 1,000 square feet
Seed bags, fertilizer bags and extension guides almost all give rates per 1,000 square feet. It's a size that matches a real yard. Farm guides use acres: one acre is 43,560 square feet, so a per-acre rate divided by 43.56 gives you the per-1,000 number.
The math is simple. Area ÷ 1,000 × rate. A 5,000 square foot lawn at 4 pounds per 1,000 needs 20 pounds of seed.
New lawn or overseeding
These are two different jobs, and the rate changes a lot between them.
A new lawn starts from bare soil. Every square foot needs seed, so the rate is high. Overseeding means spreading seed into grass that's already there to thicken it up. The existing turf fills most of the space, so you use less. Search results quote anywhere from 2 to 5 pounds per 1,000 square feet for overseeding and 4 to 8 for a new lawn, but those ranges span very different grasses. That's why the calculator asks for the grass type.
Grass type matters
Seeds aren't the same size. Kentucky bluegrass seed is tiny, so a pound covers a lot of ground. Tall fescue seed is big and heavy, so you need many more pounds for the same lawn. The rates in our list come from university extension publications, and each one links to its source.
Your bag is still the final word. Blends and coated seed change the numbers, and the label is written for exactly what's inside. If the bag says something different from our table, type the bag's rate in and use that.
Fertilizer from the label
The three numbers on a fertilizer bag are percent nitrogen, phosphorus and potassium by weight. A 29-0-4 bag is 29% nitrogen. To put down a set amount of nitrogen, divide it by that percent. For 1 pound of nitrogen per 1,000 square feet with 29-0-4, that's 1 ÷ 0.29, about 3.4 pounds of product per 1,000 square feet.
How much nitrogen to apply, and when, depends on your grass and region. Follow the bag or your extension office. If you're seeding, look for a fertilizer labeled for new lawns; the lawn fertilizer calculator part of this page just does the math on whatever you enter.
Getting the seed to grow
Seed needs to touch soil. On a new lawn, rake the surface loose, spread half the seed in one direction and half crosswise, then rake lightly and roll. When overseeding, mow short and rake out thatch first, or the seed sits on top and dries out. Keep the top layer moist until the grass is up. That usually means light watering more than once a day at first.
Timing matters as much as rate. Cool-season grasses like fescue and bluegrass do best seeded in late summer or early fall. Warm-season grasses go in once the soil warms up in late spring.
Questions people ask
How much grass seed do I need for 1,000 square feet?
It depends on the grass and the job. Overseeding takes less than a new lawn, and fine-seeded grasses take less than coarse ones. Pick your grass above, or type the rate from your bag.
Is this a grass seed calculator for a new lawn?
Yes. Switch to "new lawn" and it uses the higher seeding rate for bare soil. Switch to "overseed" for thickening an existing lawn.
What if my seed bag says a different rate?
Use the bag. Type its rate into the calculator and it replaces ours. The label is written for that exact seed, blend and coating.
How do I convert a per-acre rate?
One acre is 43,560 square feet. Divide the pounds per acre by 43.56 to get pounds per 1,000 square feet.
Can I use it as a lawn fertilizer calculator?
Yes. Enter the N-P-K numbers from the bag, how much area one bag covers, and the nitrogen rate you're aiming for. You'll get pounds of product and the number of bags.
Should I put down more seed to be safe?
Not much more. Seed sown too thick crowds itself, and the seedlings compete for water and light. Stick close to the rate and fix thin spots later.
When is the best time to seed a lawn?
Late summer or early fall for cool-season grasses like fescue and bluegrass. Late spring for warm-season grasses. Your extension office can give dates for your area.